HF5605T – 1 Power: 17,065 btu / 240v / 5000w Please note, this heater requires direct wire installation The Multi – Watt Fan Forced Unit Heater is a great way to add warmth to any industrial space during those cold days and nights! Featuring a totally enclosed single phase, permanently lubricated, thermally protected motor, this exceptional heating unit is mounted with rubber insulators to minimize vibration and noise. The block finned steel element and automatically resetting over-heat limit control combine to make this unit both efficient and safe to use. The heavy gauge welded steel cabinet has a powder coated finish, as well as a control compartment with a hinged and latched access door. Other features include individually adjustable louvers, hydraulic action thermostat and a heavy duty mounting bracket to allow for horizontal or vertical discharge. Please note, this heater requires direct wire installation by an electrician Features – Heavy gauge welded steel cabinet – Powder

Read More

The Lakewood Model 5500 is a triple 600/900/1500 Watt, ice white and gray colored, oil filled, heater with a steel six fin cabinet. This model has a heating element factory sealed in mineral oil and a dual rocker switch for adjusting the wattage. This design never requires refilling, and produces NO fumes or flames. The unit has a thermostat with an automatic on/off function to maintain a constant temperature in your space, large wheels for easy rolling, and a convenient carrying handle. Additional safety features include power and caution indicator lights, internal high limit safety fuse, and an internal tip over switch that causes the heater to shut off if tipped over. This product comes with a one year limited

Read More

Powerful and reliable heaters offer instant heat for industrial workspaces, remodeling jobs, workshops, construction sites and more. Constructed of heavy-duty 20-gauge steel for years of rugged use. Features overheat safety shutoff, large-capacity fuel tank and instant ignition. CSA certified. BTU Output: 50,000, Heating Capability (sq. ft.): 1,200, Full Load Run Time (Hours): 11, Fuel Capacity (gal.): 4, Fuel Type: Kerosene, Igniter: Auto-start, Cart: No, Dimensions L x W x H (in.): 33 x 15 x

Read More

The Lakewood Model 205 is a 1320 Watt, ice white and gray colored, fan forced heater with a baked enamel steel cabinet, and a convenient carry handle. This model has a ribbon heating element and a thermostat with an automatic on/off function to maintain a constant temperature in your space. The safety features of this model include power and caution indicator lights, an internal high limit thermostat which causes the heater to automatically shut off and reset after cooling, an internal tip-over switch which will shut the unit off if it’s tipped over, and a three prong grounded cord. This unit comes with a one year limited

Read More

This powerful quartz heater is mountable on a wall or ceiling. It features an adjustable-angle halogen light and a pull string that controls the heat settings and the halogen light. There are two heat settings for your comfort: 760/1500 Watts. The high-efficiency quartz element provides immediate, safe heat. The red power indicator light lets you know when and it is enclosed by a durable metal housing. A 90-Degree vertical tilting bracket is included for convenience in mounting. 3-Prong Grounded Plug. 120V A.C. /

Read More

DeLonghi’s Multi-position Ceramic Heater functions both as a tower heater and floor heater. It’s heavy-duty steel body construction makes it perfect for both the living room or the garage. The roll-back safety system roll bars automatically reposition the heater to a safe position in case the heater is misplaced on the floor covering the air intake grilles. Front roll bars prevent overheating that occurs when the grille is obstructed. When used as a floor heater, the unique angled heat flow is directed slightly upwards to extend the warming range beyond just your feet. Also features a 4 hour timer, adjustable thermostat, two heat flow settings, anti-freeze setting, and safety thermal

Read More

This is our Infratech 33” Electric Radiantl Garage/Warehouse Heater, with 1500 watts and 120 volts, providing maximum efficiency, a simple low cost installation, and a stainless steel or standard powder coat finish available.

Read More

The Cadet Register Plus premier fan-forced heater is often chosen for its similar appearance to a central system register vents. A large squirrel cage blower quietly provides increase airflow allowing for lower surface and air-at surface temperatures. The wall can is designed for quick installation with mounting legs that minimize measuring time. Primary Heating Application: Wall heater, Volts: 120, Amps: 4.17 / 8.33 / 12.5, Watts: 500 / 1000 / 1500, Blower Included: Yes, Thermostat Included: No, Receptacle Type Required: Hardwire, Remote Included: No, Thermal Cutoff Safety Device: High temperature manual reset turns off heater if normal operating temperatures are exceeded, Dimensions W x D x H (in.): 14 x 4 x 7

Read More

This Dimplex industrial unit heater has spiral finned elements and a sealed ball-bearing motor. The ceiling hanger bracket is included and optional wall bracket is available (allows swivel movement). The five-way adjustable louvers to direct airflow. The heating element has a metal tubular sheath fused with spiral steel fins and contains a high quality nickel-chromium wire, encased in solidly packed magnesium oxide insulation. The fan size and pitch is matched to the power and speed of the unit, to optimize CFM, air throw, temperature rise, and quietness. The motor is heavy duty, continuous operation, totally enclosed, thermally protected with permanently lubricated ball

Read More

This Dimplex industrial unit heater has spiral finned elements and a sealed ball-bearing motor. The ceiling hanger bracket is included and optional wall bracket is available (allows swivel movement). The five-way adjustable louvers to direct airflow. The heating element has a metal tubular sheath fused with spiral steel fins and contains a high quality nickel-chromium wire, encased in solidly packed magnesium oxide insulation. The fan size and pitch is matched to the power and speed of the unit, to optimize CFM, air throw, temperature rise, and quietness. The motor is heavy duty, continuous operation, totally enclosed, thermally protected with permanently lubricated ball

Read More